PDF Bachelor of Science in Biomedical Engineering

EBM 501 Lesson 7: ENT and Ophthalmic Instruments

Lecture on ear, nose and throat and ophthalmic instruments: speech and hearing as the means of communication, the audiometer and the tests carried out with it, instruments used in the ear, nose and throat clinic, and the ophthalmic instruments used to examine the eye and measure vision.

Document preview

Page 1 of 17 · first page only

PDF

More materials from the same course.

EBM 403: Biomechanics I Course Slides - Human Motion and Arthroplasty Complete lecture deck for the unit. Covers kinematics of human motion, goniometers, accelerometers and opto-electric imaging, local and global reference frames, the matrix method for location, rotation and transformation, static analysis with free body diagrams, hip and knee joint loading, implant design criteria, and the history and development of total knee arthroplasty designs including mobile-bearing and resurfacing options. PDF KES 40.00 Maintenance Management of Medical Equipment in Hospitals Open-access article in Industrial Engineering Letters, volume 2 issue 3, by David Mutia and colleagues on maintenance management of medical equipment in Kenyan hospitals: the practices in use, the effect of corrective against preventive maintenance, spare part and record problems, and the factors that determine equipment availability. PDF KES 40.00 EBM 510: Electric Motor Drive Systems Continuous Assessment Test Forty-minute continuous assessment paper on electric motor drive systems in which any three of six questions are answered. A three-phase fifty-hertz induction motor with equal stator and rotor resistances of five hundredths of an ohm and reactances of three tenths of an ohm, run at half its rated voltage and half its rated frequency: the maximum torque at the reduced supply as a fraction of its normal value. The wound-rotor induction motor rated twenty-five kilowatts at nine hundred revolutions per minute on four hundred and fifteen volts, fed through a three-phase rectifier and a chopper at two hundred and fifty hertz with an open-circuit line voltage of three hundred and fifty volts and a one-ohm load resistance: the chopper on-time that develops a gross torque of one hundred and eighty newton metres at eight hundred revolutions per minute against a synchronous speed of one thousand. For a synchronous motor, three torques associated with it and two methods of starting it. The derivation of the expression relating torque and speed of a cylindrical rotor synchronous motor. A four-pole induction motor on a fifty-hertz supply: synchronous speed, rotor speed at five per cent slip, and rotor frequency when the rotor runs at one hundred revolutions per minute. And the labelled torque-speed characteristic of an induction motor showing the plugging, motoring and generating regions, with regenerative braking explained. PDF KES 40.00 Guidelines for Writing Academic Research Proposals and Projects Revised 2013 edition of the university guidelines issued from the Office of the Dean: how a proposal and a project report are structured, the table of contents expected, referencing and formatting rules, and the process for approval, defence and submission. PDF KES 40.00 ECU 400: Research Methodology Take-away CAT Take-away continuous assessment for the unit, set by the Electrical and Electronics Engineering Department of the School of Engineering and Technology, with the questions on knowledge management, the research problem and the proposal elements a student is expected to answer. PDF KES 40.00

From the blog

Study guides and revision advice linked to this material.