PDF Bachelor of Science in Biomedical Engineering

EBM 510 Tutorial Questions One: Worked Solutions

Worked answers to the first tutorial, showing the arithmetic rather than only the result. The pulse-width question is solved from the armature circuit equation, average voltage equal to armature current times the sum of armature and field resistance plus back electromotive force, giving 105 volts and then the on-time from the average voltage, supply and frequency, at 2.386 milliseconds; the second begins from the case of zero back electromotive force to find the starting current, and the remaining questions follow the same route through the chopper on-time, the armature resistance drop and the motor constant.

Document preview

Page 1 of 4 · first page only

PDF

More materials from the same course.

EBM 510 Tutorial Questions One First tutorial sheet on direct current drives. Questions include a constant-frequency system controlling the speed of a direct current traction motor from a 250-volt supply with combined armature and field resistance of a quarter of an ohm, average current of twenty amperes and a chopper frequency of 176 hertz, where the pulse width must be found for an average back electromotive force of 100 volts; and a chopper-controlled separately excited motor on a 220-volt supply with armature resistance of 0.2 ohms and a motor constant of 0.08 per rpm driving a constant-torque load that requires twenty-five amperes of average armature current. PDF KES 40.00 Suitability of Geotechnical Landfill for Municipal Solid Waste Management in Nairobi City Literature review chapter of an engineering research proposal on geotechnical landfill for municipal solid waste management in Nairobi City: the volumes and composition of the city's waste, the siting and liner requirements of a landfill, the studies on leachate and groundwater risk, the alternatives reviewed, and the gap the proposed study addresses. PDF KES 40.00 Final Project Report Template Template for the bound report: the cover page with the university logo, faculty and department, project title, the student's name and registration number, the supervisor and the date, with the statement that the project is presented in partial fulfilment of the degree, followed by the declaration of originality signed by student and supervisor and the remaining front matter and chapters. PDF KES 40.00 EBM 407: Project Proposal for a Portable E-Health Monitoring System with Predictive Treatment Full project proposal for a portable e-health monitoring system for continuous vitals monitoring and predictive treatment: the abstract, background on patient vitals and late presentation, problem statement, objectives, scope, the literature on remote monitoring and prediction, the methodology, the system design and the work plan. PDF KES 40.00 EBM 409: Concept Note for a Virtual Personal Assistant Service Concept note for delivering authentic virtual personal assistant services: the goal, the resources needed including start-up capital for research and setup, the beneficiaries, and the design of the service. Continuous assessment concept note for EBM 409 Machine Design, written on the department's cover with the background, problem, objectives, resources, expected outcome and the design approach. PDF KES 40.00