PDF Bachelor of Science in Biomedical Engineering

Magnetic Resonance Imaging System

Slides on magnetic resonance imaging, built on nuclear magnetic resonance tomography, which uses magnetic fields and radio frequency signals to obtain anatomical information. Works through the reconstruction techniques, including the sequential point method, which divides the sample volume into points along three axes and so fixes the number of NMR signal values that must be acquired, and through the parts of the system: the magnet and its field, the gradient coils, the radio frequency system, the detection system that yields the output signal and the imager that reconstructs and displays the images. Treats biological effects, with heating among the potential hazards, and the advantages of the method, superior contrast between near-identical soft tissues, cross-sectional images in any orientation rather than only at right angles as in computed tomography, and contrast that can be chosen by mechanism.

Document preview

Page 1 of 7 · first page only

PDF

More materials from the same course.

EBM 406: Professional Registration Bodies and Their Role Lecture on professional registration: the primary role of a registration body in setting and upholding standards of practice, the register of qualified practitioners, and what registration means for an engineer working in a hospital. PDF KES 40.00 Nuclear Medical Imaging Systems Slides on radio isotopes, used for both diagnosis and therapy, where a small amount of radioactivity is introduced into the body and traced from outside. The curie is defined as 3.7 by ten to the tenth disintegrations per second, and organ scanning typically uses three to twenty-five millicuries. Covers radiation detection and the pulse height analyser, since the radioactive pulses arrive as single electrical impulses and the height of the impulse tells you the energy of the particle that produced it, the scintillation crystal coupled to photomultipliers, and the multicrystal gamma camera, which overcomes the losses of a single crystal by using a rectangular array of crystals with reflective material to minimise scattering. PDF KES 40.00 EBM 409: Concept Note for a Smart Walking Stick for Persons with Visual Disability Concept note for the design of a smart walking stick for persons with visual disability: the mobility and hazard problems faced by visually impaired people, the sensing proposed, the resources, and the outcome expected. Continuous assessment concept note for EBM 409 Machine Design, written on the department's cover with the background, problem, objectives, resources, expected outcome and the design approach. PDF KES 40.00 EBM 500: Biomedical Engineering Project II Course Outline First semester outline for the final year project, signed by the senior lecturer of the department on 30 September 2019: the pre-requisite of Engineering Project I, the objective of systematically solving real-life engineering problems over two semesters, the expected outcomes, the deliverables and their assessment, and the fifty-four references listed for the unit, from biomaterials and medical equipment dictionaries to patient-specific modelling and the commercialisation of biomedical technologies. PDF KES 40.00 Growing Leaders Programme Session 10: Basic Skills and Techniques of Counselling The practical skills and techniques a leader needs for counselling, on the ground that specific skills must be acquired to support the wholeness and wellbeing of the people being led. Works through the techniques one by one, including reflection of feeling, the attempt to understand a client's point of view and communicate that understanding back so the client can think of their feelings as part of themselves. Ends with the role-play exercise in which each group takes turns as client, counsellor and observer until everyone has played each part, with the facilitator ensuring the practice is done professionally. PDF KES 40.00