PDF Bachelor of Science in Biomedical Engineering

Project Overview Sample: School Biometrics with Face Recognition and Parent SMS

Worked project overview showing how a system is presented: the functions of face recognition, temperature detection and the prompt sent to parents on arrival and departure, the device with its infrared thermal imaging module, speaker and dimensions, the short message texts issued, the web interface used for enrollment and configuration, and the system diagram joining the scanner to the server, the cloud and the message gateway.

Document preview

Page 1 of 6 · first page only

PDF

More materials from the same course.

EBM 404: Project Proposal for a Continuous Remote Patient Monitoring System Proposal for a continuous remote patient monitoring system for home-based care and remote areas: the abstract, background on patient vitals and late diagnosis, the problem of long queues at public health centres, objectives, scope and justification, the literature reviewed on wearable sensing and telemetry, and the methodology and system design proposed. PDF KES 40.00 ECU 500: Engineering Practice and Ethics Examination Paper Examination paper set to the electrical, petroleum, biosystems, aerospace and biomedical engineering programmes, in which question one is compulsory and any two of the remaining questions are answered. Question one asks what an engineer is, for two important aspects of the code of ethics for engineers and why each matters in an engineer's work, and for the difference between the engineer-client and the engineer-contractor relationship, one problem that may poison the relationship between an engineer and a contractor on a project and how such a problem can be resolved. It then sets a case in which a project managed by a reputable firm with a record of similar work has its contract awarded to the lowest qualified bidder whose owner is the consultant's brother-in-law, and asks whether the firm should be awarded the contract and what the engineer should do. PDF KES 40.00 EBM 406: Functions of the Hospital Engineering Department - Structured Guide A table-of-contents guide to the department's functions: introduction, the roles of the engineering department, record keeping of lifecycle history, maintenance and repair, utilisation and user training, and responding to alerts from internal adverse incident reports and manufacturer recalls with analysis of the technical and safety information. PDF KES 40.00 Economies of Scale and the Resource Mix Revision slides that begin from the unit cost formula, total production cost in a period divided by total output in units, and the economies of scale that arise when unit costs fall as output rises. External economies are shown to come from the industry as a whole rather than the firm, often clustered geographically, through specialist suppliers close at hand, shared research and development facilities and a pool of skilled labour to draw on. The second half weighs labour-intensive against capital-intensive production, setting the greater productivity, quality and speed and lower labour cost of capital intensity against the investment required, the risk of obsolescence and resistance to change from the workforce, and the flexibility, multi-skilling and continuous improvement of labour intensity against training cost and labour turnover, closing on diseconomies from machinery and employee breakdown at high capacity utilisation and loss of management focus. PDF KES 40.00 EBM 407: Machines Design Second Semester Examination Machine design paper built around medical devices. The compulsory question takes a coronary stent placed in the arteries during percutaneous coronary intervention through the design considerations for the device, the factors a surgeon weighs when choosing its material, its classification under the pharmacy and poisons board regulation by duration of use, invasiveness and risk, the different considerations for a bio-resorbable against a metallic non-absorbable stent, the sterilization methods used on medical devices and which suits a medical-grade cobalt-chromium stent coated with everolimus, and the temperature needed to run an accelerated age test for a three-year shelf life at a ten-to-one time reduction with a Q10 of two from a room temperature of 22 degrees. Optional questions list the solid modelling operations and sequential steps that build a pump cover in a CAD package, and separate a trademark from a copyright. Others set the components of a device testing protocol, the nonclinical tests run while developing the stent, and a nonclinical testing standard operating procedure for a characteristic of a surgical suture. The last takes a failure mode of a personal insulin pump whose display stays live while the battery can no longer drive the pump: severity, occurrence and detection ratings with rationale, the risk priority number, the action the manufacturer should take, the completed failure mode and effects analysis template, and the recalculated number after a simple fix. PDF KES 40.00

From the blog

Study guides and revision advice linked to this material.