PDF Bachelor of Science in Biomedical Engineering

EBM 510 Tutorial Questions Two

Second tutorial sheet, on converter-controlled series motors. One question takes a fifteen horsepower, 230-volt, 900 rpm direct current series motor whose speed is controlled by a single-phase semi-converter, with combined armature and field circuit resistance of 0.18 ohms, continuous and ripple-free motor current, a machine constant of 0.04 newton-metres per ampere squared, a firing angle of thirty degrees and a 240-volt alternating supply, and asks for the motor current and motor torque. Another takes a fifteen horsepower, 220-volt, 1000 rpm series motor controlled by a single-phase semi-converter and then a full converter from a 250-volt alternating supply, and a third question continues the comparison of the two converter arrangements.

Document preview

First page only

PDF

More materials from the same course.

EBM 501 Lesson 4: Electroencephalogram, Group Presentation Group presentation on the electroencephalogram: the activity of the brain and central nervous system, the scalp electrodes and lead placement, the rhythms seen in the trace, the artefacts that appear in a recording, and the amplifiers and recording systems used to capture them. PDF KES 40.00 EBM 506: Biomechanics II Continuous Assessment Test 1 Continuous assessment test one in biomechanics two, taken on the twenty-fifth of November in the first semester of the academic year. Two questions. The main parameters engineers consider when predicting and calculating the lifetime and wear of healthy and implanted joints - friction, surface, lubrication and wear - each discussed in terms of the synovial joint with equations and illustrations where applicable. Then the six different mechanisms thought to be involved in human lubrication, the region each one can be applied to, and the joint property that explains the choice. PDF KES 40.00 Thermal Imaging Systems Slides on medical thermography, the science of visualising the patterns formed by changes in skin temperature with an infrared camera. Covers the radiation physics that decides what the camera can see, including absorption and its effect on emissivity and the fact that the human body is almost opaque to the infrared wavelengths used, and the detector, where the smallest temperature change that produces a signal equal to the system noise is the minimum temperature resolution and so defines the sensitivity of the equipment. Distinguishes quantitative thermography, in which successive studies must be made comparable, from the qualitative picture, and describes the detectors used, including the image tube that focuses the radiation onto an infrared-sensitive target and the camera built on an infrared sensor with a digital focal plane array. PDF KES 40.00 EBM 406: Professional Registration Bodies and Their Role Lecture on professional registration: the primary role of a registration body in setting and upholding standards of practice, the register of qualified practitioners, and what registration means for an engineer working in a hospital. PDF KES 40.00 EBM 407: Project Proposal for a Portable E-Health Monitoring System with Predictive Treatment Full project proposal for a portable e-health monitoring system for continuous vitals monitoring and predictive treatment: the abstract, background on patient vitals and late presentation, problem statement, objectives, scope, the literature on remote monitoring and prediction, the methodology, the system design and the work plan. PDF KES 40.00

From the blog

Study guides and revision advice linked to this material.