PDF Bachelor of Science in Mechanical Engineering

EMM 216: Workshop Processes and Practice III First Semester Examination

Manufacturing processes paper on machining, joining and abrasion. Asks what milling is and how a milling machine is specified, the classification of milling machines and grinding machines, and the advantages of welding over other joints. Works a face-milling cut with a plain milling cutter of given diameter, tooth count, spindle speed and feed to the cutting conditions, and reviews the common methods of making gears. Closes on the equipment used for oxyacetylene welding, the steps to be observed when executing a weld, the milling attachments available, the difference between up-cut and down-cut milling, and the gas welding process.

Document preview

Page 1 of 2 · first page only

PDF

More materials from the same course.

EMM 107 Continuous Assessment Tests 1 and 2 on Steel, Aluminium, Polymers and Composites Two tests covering manganese and nickel as alloying elements, sulphur and phosphorus in pig iron, how carbon content changes steel microstructure, the engineering appeal of aluminium alloys, polymer forming and fillers, and the limits of composite materials. PDF KES 40.00 EMM 217: Principles of Engineering Design First Semester Examination Design paper that starts from why materials knowledge matters to a design engineer and sizes the support posts of a tensile-testing apparatus from yield strength and a chosen factor of safety. Works the design process end to end on a product of the candidate's own: the questions that define the problem, the levels of analysis applied to candidate solutions, designing for safety, the questions that make up a testing protocol, and the options when a prototype fails that protocol. Distinguishes standards from codes and developmental, adaptive and new design, applies ergonomic principles to a hospital bed, and estimates the factor of safety under the maximum shear stress, distortion energy and maximum normal stress theories. Selects a hull material against stated strength, hardness and cost limits, then treats product liability, design constraints, manufacturability, noise, machine elements, bearing selection, and the difference between a model and a prototype. PDF KES 40.00 EPL 300 and EMM 302: Solid and Structural Mechanics Continuous Assessment Test Continuous assessment test carried by two unit codes. A rectangular steel block loaded by three mutually perpendicular forces gives the strains along each force, the change in volume and the bulk modulus and modulus of rigidity. A tapered tension specimen between gauge marks yields the modulus of elasticity from the measured extension, compared in strain energy with a uniform specimen of the same material carrying the same load. Closes on the force in every member of a truss by the method of joints, and on a compressed-air tank formed by welding two steel hemispheres, where the permissible internal pressure is limited in turn by allowable tensile stress, allowable shear stress, a cap on surface strain and the tensile load the welded seam can carry under its factor of safety. PDF KES 40.00 EMM 203: Engineering Thermodynamics I Examination Thermodynamics paper on systems, processes and properties, the First Law and the non-flow energy equation, heat and work ratios in a polytropic process, and compression of air. PDF KES 40.00 Mechanical Engineering Past Papers and CATs Collection of Year 2 mechanical engineering examination papers and CATs covering CAD, engineering mechanics, fluid mechanics, design, workshop processes and electrical engineering. PDF KES 40.00

From the blog

Study guides and revision advice linked to this material.