Home
list_alt All Notes
Uncertainty and Risk Analysis: A Practical Guide
A practical guide to uncertainty and risk analysis from Business Dynamics at PricewaterhouseCoopers, written by Chris Rodger and Jason Petch, for costing projects where the inputs are not known with certainty. Sets out the classification of risks by their sensitivity of the output, with boundaries suggested for high, medium and low, high being more than about two per cent of total project cost, and the drafting of risk statements so that they can be quantified. Discusses the quantification of risk from expert opinion, the problems that follow from its subjective nature and the preference for empirical data wherever it exists, and the mechanics of sensitivity analysis, warning that holding a correlated input constant, such as sub-let floor area when testing rent inflation, will overstate or understate the impact. The later chapters treat the presentation of results, decision trees and the utility framework, defining utility as the subjective value a given financial amount carries, so that two options of equal utility imply genuine indifference between them.
Project Planning, Scheduling and Resource Allocation
A project presentation on planning and scheduling that first summarises the project management process from defining the project and stating the need, problem or opportunity and its objectives, then compares the scheduling techniques: milestone charts, Gantt or simple bar charts with horizontal bars against a time scale, the critical path method, graphical evaluation and review technique, and the precedence diagram method. The second half is a full case study of a bridge project over the Yamuna linking the Allahabad districts of Naini, Jhusi and Phaphamau across an industrial centre of automobile, fertiliser and textile firms, where a narrow two-lane combined highway and railway bridge of the late nineteenth century could no longer carry increasing vehicle weights and sizes. Documents the schedule overrun, a period scheduled from January 1994 to July 2004 against a planned January 1994 to March 2000, or 169 per cent of the plan, and the monitoring regime of seven instrumented positions checking alignment, weight and gradient of the pylons twenty-four hours a day from the toll booth control room, with joint fabrication and the resource and cost schedules that followed.
Capacity and Resource Planning for an Engineering Technology Department
Conference paper AC 2009-1489 by Daniel P. Johnson, associate professor and department chair in manufacturing and mechanical engineering technology at the Rochester Institute of Technology, on applying industrial capacity planning to a university department. Argues that although most education concepts such as curriculum design, learning styles and motivation have little correlation with industrial production, capacity planning maps directly, since enrolment demand plays the same role as product demand on a factory. Describes the use of ordinary spreadsheet tools such as linear regression to build time-series forecasts of student demand for academic resources, then the department's real data: enrollments by programme, available sections and students per section for manufacturing processes laboratories, solid modelling, materials technology and geometric dimensioning and tolerancing. Compares the forecasting tools available and concludes that a Monte Carlo evaluation of the likelihood of future resource shortages gave the best insight into the department's coming constraints, with heijunka-based levelling discussed as an alternative.
Resource Scheduling Under Time and Resource Constraints
Lecture slides dividing resource scheduling into time-limited and resource-limited scheduling, on the ground that the project scheduling methods covered earlier did not consider the constraint of resources, so that projects either must meet a fixed deadline with effectively unlimited resources or must work within a fixed resource base. The objectives are to determine exactly what resources a project requires and make them available when needed, and to use each resource as efficiently as possible. Works through a resource histogram read week by week, showing two staff required in week ten against five in week fourteen, the bottom row of the graph being the critical path where every item has zero float, and how levelling the resource profile as far as possible reduces cost. The second half adjusts project duration to a fixed level of resources, with an activity table of predecessors, durations, early and late starts and floats, and an exercise in plotting the chart under a strict limit of four resources.
Resource Allocation, Smoothing and Cost Schedules
Lecture slides on resource allocation as the review and modification of the ideal activity plan, which revises stage or project completion dates and produces the activity schedule, the resource schedule and the cost schedule. Covers the identification of resource requirement by taking each activity in turn and listing what it needs against the expected level of demand, the uneven histogram that results and the smoothing required, since a profile that demands more of a resource than is available cannot stand, and the two smoothing devices of adjusting start dates and splitting activities. Explains priority rules for resource-limited work, activities that could proceed simultaneously being ordered by simple criteria such as shortest critical activity first, and the Burman priority list, then the human side of allocating individuals by availability, criticality, risk and training. Closes on the cost schedule and its categories of staff cost, salary and overheads, and team building.
EBM 508 Assignment: Queuing and Resource Allocation
Student group assignment answers. The first question explains the components of a basic queuing process, a model of a waiting line built to make the length of the queue and the waiting time predictable: the input source that generates customers over time, the finite or infinite size of the calling population, which may be as small as a number of processes for a computer to run, the arrival distribution and inter-arrival distribution, the queue discipline, and the service mechanism with its one queue to one station, one queue to several stations, several queues to one station, multi-channel and multi-stage multi-channel arrangements, together with the measures of average customers served per unit time and average service time. The second question turns to resource allocation inside an organisation, arguing that unbalanced task allocation breeds team animosity, disorganisation and failure of teamwork, that the loss of good people through voluntary attrition is the final cost, and that linking related tasks for one resource, such as assigning market research for two projects to the same person, is the logistical remedy.
Economies of Scale and the Resource Mix
Revision slides that begin from the unit cost formula, total production cost in a period divided by total output in units, and the economies of scale that arise when unit costs fall as output rises. External economies are shown to come from the industry as a whole rather than the firm, often clustered geographically, through specialist suppliers close at hand, shared research and development facilities and a pool of skilled labour to draw on. The second half weighs labour-intensive against capital-intensive production, setting the greater productivity, quality and speed and lower labour cost of capital intensity against the investment required, the risk of obsolescence and resistance to change from the workforce, and the flexibility, multi-skilling and continuous improvement of labour intensity against training cost and labour turnover, closing on diseconomies from machinery and employee breakdown at high capacity utilisation and loss of management focus.
Returns to Scale, Economies of Scope and Monopoly Power
Lecture slides on long-run production, starting from returns to scale measured as the percentage change in output against the percentage change in inputs: increasing returns where output rises faster than inputs and long-run average cost falls, decreasing returns where it rises more slowly and average cost climbs, and constant returns where the two move together and average cost holds. Scale economies are then classified into bulk purchasing and the monopsony power it gives a buyer of components, access to cheaper finance through lower interest rates, share issues and corporate bonds, and learning economies from length of experience in a market. Economies of scope are separated from economies of size with worked examples of shared production facilities and multi-brand ownership, and the deck ends on the way economies of scale can build monopoly power, and on the diseconomies that raise long-run average cost once a firm expands beyond its optimum scale.
Economies of Scale Notes
Notes that define economies of scale as the advantages of large-scale production which lower average cost, expressed as average cost equal to total cost over output, and divide them into pecuniary and real economies. Pecuniary economies come from paying lower prices for factors as the firm grows: discounts on large-scale operations, special discounts on raw materials, lower interest on loans, cheaper advertising and lower transport rates. Real economies reduce the physical quantity of inputs consumed and are grouped into production, selling and marketing, managerial, and transport and storage economies. Production economies are then broken down by factor, covering division of labour and specialisation, the time saved by not switching tasks, automation of the production process, cumulative volume effects, and inventory or stochastic economies, where stock absorbs random movement in inputs and outputs and cushions the loss from a breakdown.
Economies of Scale: A Critical Review of the Literature
Journal article from the International Interdisciplinary Journal of Scholarly Research, volume 1 number 1 of 2015, by Rana Salman Anwar and Salman Ali of The Islamia University of Bahawalpur. A critical review of the published literature that clarifies economies of scale as the ratio of the economy and its business support functions, the route to maximising production while minimising its cost, distinguishing marginal from average operating cost and treating internal and external economies as the two levers a business controls. Uses the organisation of the financial industry as an unusually rich data source for measuring the cost function, and argues the information matters for regulatory as well as organisational decisions.
Microeconomics: An Introduction
Introductory lecture defining economics as the study of how a person uses limited resources to satisfy unlimited wants, then walking the traditional divisions of the subject: consumption as satisfaction of human wants through goods and services, production as their creation using the factors of production, exchange as the transfer of goods for consumption, distribution as the reward of the factors in rent, wages, interest and profit, public finance as the activity of government and local authorities, and economic planning as the coordination of objectives, models and techniques. From there it moves to the micro and macro split, the terms coined by Ragnar Frisch in 1920, the consumer in equilibrium at maximum satisfaction and the producer at maximum profit, and the broad classification of markets where goods and services are exchanged.
The Input-Output Model
Lecture notes by the unit lecturer on the input-output model, the technique developed by Wassily Leontief and also called inter-industry analysis, used to map inter-industry relationships so as to understand the interdependence and complexity of an economy and the conditions for keeping supply and demand in equilibrium. Sets out its basic features: concern with production only, the question of how much of each input must be used up for a given output of a commodity under a given supply of productive factors and state of technology, and its character as an empirical investigation. Describes the four quadrants of the transactions table, with the rows of each industry showing sales to all others and the columns showing its purchases, the third quadrant of primary inputs and the fourth of final demand, and the key identity that each industry's row total equals its column total. Closes on the uses of the model, including analysis of import requirements and substitution possibilities from the split between domestic and imported materials, and the direct requirements of capital and labour.