PDF Bachelor of Science in Biomedical Engineering

EBM 501 Lesson 3: Circulatory Systems

Lecture on the cardiovascular system as the object of measurement: why a dense multicellular animal needs a circulatory system, the heart and its pumping action, blood pressure and its measurement, blood flow and the indicators used, and the instruments that read these quantities in a clinic.

Document preview

Page 1 of 18 · first page only

PDF

More materials from the same course.

Thermal Imaging Systems Slides on medical thermography, the science of visualising the patterns formed by changes in skin temperature with an infrared camera. Covers the radiation physics that decides what the camera can see, including absorption and its effect on emissivity and the fact that the human body is almost opaque to the infrared wavelengths used, and the detector, where the smallest temperature change that produces a signal equal to the system noise is the minimum temperature resolution and so defines the sensitivity of the equipment. Distinguishes quantitative thermography, in which successive studies must be made comparable, from the qualitative picture, and describes the detectors used, including the image tube that focuses the radiation onto an infrared-sensitive target and the camera built on an infrared sensor with a digital focal plane array. PDF KES 40.00 Growing Leaders Programme Session 8: Problem Solving Techniques and Decision Making Decision making and problem solving as the basic ingredients of leadership, with problem solving treated as a method and decision making as the process that leads to the right conclusion. Works the steps from identifying and defining the problem through generating and weighing solutions to implementing and following up on the chosen one, noting that a solution is often tried on a limited scale first to verify it is the best and that leaders must then carry it. Summarises the session on the point that whatever the problem, finding ways to solve it is a fundamental part of every leader's role, and that solving problems is a complex process that entails decision making. PDF KES 40.00 EBM 403: Biomechanics I Continuous Assessment Test 1 One-hour, thirty-mark continuous assessment test with three questions: describing position and displacement in three-dimensional space through the matrix method, quadriceps force and tibiofemoral joint reaction force at twenty degrees of knee flexion during single-limb stance, and biceps force, joint reaction force and joint moment at the elbow of a weight lifter holding a mass. PDF KES 40.00 ECU 500: Engineering Practice and Ethics Examination Paper Examination paper set to the electrical, petroleum, biosystems, aerospace and biomedical engineering programmes, in which question one is compulsory and any two of the remaining questions are answered. Question one asks what an engineer is, for two important aspects of the code of ethics for engineers and why each matters in an engineer's work, and for the difference between the engineer-client and the engineer-contractor relationship, one problem that may poison the relationship between an engineer and a contractor on a project and how such a problem can be resolved. It then sets a case in which a project managed by a reputable firm with a record of similar work has its contract awarded to the lowest qualified bidder whose owner is the consultant's brother-in-law, and asks whether the firm should be awarded the contract and what the engineer should do. PDF KES 40.00 System Analysis and Design Lecture slides that define the system, systems analysis and systems design, classify types of system, and set out the principal functions of the systems analyst and the phases of the systems development life cycle. Treats the analyst as boundary-spanning, concerned with detecting information from two primary sources and sending information back into the environment, and covers data gathering and analysis tools and a selection of design tools. Continues into enterprise resource planning and the reach of systems designed to operate globally rather than locally, the analyst's work with programmers on original software and with users on documentation, and the iterative alternative to the structured approach in which analysis, design and implementation repeat module by module until the project is complete. PDF KES 40.00

From the blog

Study guides and revision advice linked to this material.