PDF Bachelor of Science in Biomedical Engineering

Electric Motor Drive Systems Course Description

The unit description, in two halves. Direct current machine drives: two and four quadrant chopper control, the transfer function of the direct current machine drive system, speed and current feedback control, microprocessor control of direct current drives and variable speed drives. Alternating current machine drives: the a.c. machine system, induction and synchronous motor drives, electronic control using inverters, harmonic distortion and losses, control of frequency, voltage and power, transfer functions of a.c. machine drive systems, speed, current and flux feedback, microprocessor control in a.c. drives and the applications of a.c. variable speed drives.

Document preview

First page only

PDF

More materials from the same course.

EBM 510 Tutorial Questions One: Worked Solutions Worked answers to the first tutorial, showing the arithmetic rather than only the result. The pulse-width question is solved from the armature circuit equation, average voltage equal to armature current times the sum of armature and field resistance plus back electromotive force, giving 105 volts and then the on-time from the average voltage, supply and frequency, at 2.386 milliseconds; the second begins from the case of zero back electromotive force to find the starting current, and the remaining questions follow the same route through the chopper on-time, the armature resistance drop and the motor constant. PDF KES 40.00 EBM 501: Biomedical Instrumentation II First Semester Examination First semester paper for the biomedical engineering degree, sat on Monday the twenty-seventh of January from eight to ten. Five questions, the first compulsory at thirty marks and any two others at twenty each. Question one works the electrical analogy of the human cell with diagrams, names the three important intensive care units and their focus areas, describes the sensitivity of electroencephalograph instruments and the operation of a conventional spirometer, and separates the three groups into which blood measurement falls, showing how measurement is done in each. The other questions describe the three modes commonly employed in routine laboratory electroencephalograph recording, list the physiological functions monitored during intensive care with the instruments and the scientific principles each rests on, discuss the construction and operation of an electrocardiograph machine, name the three major instruments used in ophthalmology and describe their operation, draw and explain the series of waves observed in the electrocardiogram in each cardiac cycle, outline the criteria applied in the design of input electrodes, define the audiometer and its operation, demonstrate lung volumes and capacities, and determine a patient's total lung capacity from breathing a mixture from a two-litre reservoir containing ten per cent inert gas which equilibrates with the lungs at two point seven per cent. PDF KES 40.00 Three-Phase Induction Motor Drives and Their Torque Characteristics Notes on the induction motor, contrasted with the direct current machine where conductors on a rotating armature pass through a stationary magnetic field: here the magnetic field rotates, so no electrical connection has to be made to the rotor. Develops the slip, the equivalent circuit and the three-phase torque expression, showing that with a constant supply voltage torque is proportional to slip resistance over the impedance term and is therefore maximum when rotor resistance equals rotor reactance. Works through the torque-speed characteristics in the forward and reverse directions and the operating cases of motoring, plugging and generating at slip one and slip zero, and continues into the methods of controlling the machine. PDF KES 40.00 Growing Leaders Programme Session 3: Effective Leadership and Management Skills On the organised sets of behaviour managers display and the principal skills they must develop. Works through the three types of managerial role, the technical, human and conceptual skills, with human skills defined as the ability to interact well and cooperate with other people to get things done through them and as equally important at every level of the organisation, and conceptual skill in dealing with ambiguous situations with far-reaching consequences. Sets leadership against management, one promoting vision and dramatic change such as new products and one managing vision and holding order and predictability, and shows both as approaches to improving results. PDF KES 40.00 Project Planning, Scheduling and Resource Allocation A project presentation on planning and scheduling that first summarises the project management process from defining the project and stating the need, problem or opportunity and its objectives, then compares the scheduling techniques: milestone charts, Gantt or simple bar charts with horizontal bars against a time scale, the critical path method, graphical evaluation and review technique, and the precedence diagram method. The second half is a full case study of a bridge project over the Yamuna linking the Allahabad districts of Naini, Jhusi and Phaphamau across an industrial centre of automobile, fertiliser and textile firms, where a narrow two-lane combined highway and railway bridge of the late nineteenth century could no longer carry increasing vehicle weights and sizes. Documents the schedule overrun, a period scheduled from January 1994 to July 2004 against a planned January 1994 to March 2000, or 169 per cent of the plan, and the monitoring regime of seven instrumented positions checking alignment, weight and gradient of the pylons twenty-four hours a day from the toll booth control room, with joint fabrication and the resource and cost schedules that followed. PDF KES 40.00